Your location:

Australia United States

Your location:

Australia United States

Maxisil P

RDX1004

The premium under water sealant

Neutral Cure

Maxisil P is designed for swimming pools, water fountains, public showers, gymnasium & all under water applications.

*Please note that colour samples are not true to the actual colour. This is a guide only.

  • For interior & exterior use.
  • Easy to apply with good tooling properties
  • Maxisil P shows an extreme resistance to mould formation.
  • Has excellent adhesion to substrates where permanent water/wet stresses occur. Primer needs to be used.

*Please note that colour samples are not true to the actual colour. This is a guide only.

DEPTH OF JOINTWIDTH OF JOINT
5mm7mm10mm12mm15mm21mm25mm
5mm12.0*8.0*6.0*
7mm6.0*4.0*3.0*
10mm3.0*2.5*2.0*1.5*
12mm2.1*1.7*1.2*1.0*
15mm1.3*1.0*0.8*

*Metres per 300/310ml cartridge

Note: These values are approximate and serve as a rough guide for
right-angled joints.

The depth of the joints is measured to the rear of the profile.
The authorised dimensions of the joints are governed by
DIN 18540. Accordingly all exterior expansion and
connection joints must have a minimum width of 10mm
and a maximum width of 35mm. Up to a width of 15mm
the depth of the joint should correspond to the width.
If the width of the joint exceeds 15mm, then the depth
should be approx 2/3 of its width.

  • Primer 1215

    RDX2012

  • Maxisil Applicator

    RDXA3000

  • Maxisil Extension Nozzles

    RDXA2051

  • Maxisil Corner Nozzles

    RDXA2050 / RDXA2050a

G’DAY!

Looks like you are from

USA

Let’s redirect you