Hazards and prevention of mold

Mold is a very serious subject and demands your full attention!

Mold in our home is a concern particularly coming into the cooler months where the additional moisture in the air creates a playground for mould, all 50,000 types of mould fungi in fact.

Once the mold has become established in our home – and if it is not identified and eliminated soon – it can cause long-lasting damage to health, such as:

• – Allergies
• – Respiratory diseases, including asthma
• – Rashes
• – Sleep disorders

In the worst-case even pollution in the form of carcinogenic substances that form in some types of mold.

Causes

There are many causes of mold forming in your home, especially in hard to reach places such as on sealants in wet areas. The following conditions help mold form on sealants and is something your family should be mindful of:

• – High air humidity with little air movement
• – Warmth
• – Residues from body care materials such as shower gel

Since elastic silicone joints have low thermal conductivity, they are the warmest part of a tiled surface and where mould thrives best, in combination with organic residues and moisture.

Read the fact sheet here

Prevention is better

The key to prevention against mold on sealants is good ventilation and regular cleaning.  In addition to regular cleaning, the elastic joints should be treated at definite intervals with a commercial disinfectant.

For cleaning, preferably neutral or alkaline cleaning agents should be used, since mold spreads more vigorously under acid conditions.

Maxisil is a premium silicone product as it contains fungicidal (mold resistant) properties in all its silicone sealant products. By using a fungicidal formulation, mould attack is prevented as much as possible.

To ensure the sealants are physiologically safe, Maxisil only uses fungicides that do not contain any toxic heavy metal compounds or other toxic substances.

The anti-fungal effect cannot be guaranteed permanently since the protective agents can be inactivated over time by the mold/fungi.

Maxisil silicone sealant products can be applied to wet and dry areas, inside and outside your home and used on ceramic, tiles, grout and natural stone surfaces.

I have mold. What can I do?

If a mold attack occurs, as long as it is just limited to the surface (primary attack), it should be treated with anti-fungal spray from Maxisil – Maxiclean Solution.

If the mould has already entered into the sealant (secondary attack), the sealant must be removed completely. Before replacing the sealant, the affected joint areas should be treated with anti-fungal spray in order to remove any fungus spores.

Otherwise, if any spores are still present around the joints, a fungal attack may rapidly reoccur in spite of the new sealant having fungicidal properties.

The best course of action for removing moldy silicone is:

• – remove all existing silicone that has mold present
• – clean the area thoroughly with an anti-fungal spray Maxisil – Maxiclean Solution
• – select your silicone using one of Maxisil’s 56 colours, find the perfect silicone colour here
• – apply your silicone smoothly using Maxisil Smoothtex and  Maxisil’s Silicone Applicator

How does Maxisil help your mold problem?

Maxisil helps your mold problem by providing a solution to reduce and remove any fungus spores.

Maxisil is not just for your bathrooms:

• – Bathrooms and wet areas – find out more here 
• – Natural stone – find out more here 
• – Pools and fountains – find out more here 
• – Waterproofing – find out more here 

For surface attacks, use Maxisil’s anti-fungal spray, and for sealant attacks, removal of the sealant is required; it’s easy to remove with our complete system; for the steps on this process, click here.

Don’t trust just any silicone and sealant system in your next project – make sure you are safe with Maxisil.